针对薄板在水中的振动，采用Abaqus，Ansys Workbench，Virtual lab等软件进行数值计算。几种软件在操作流程上基本一致，与实验结果比较表明，各个软件在计算前几阶模态频率均十分接近。在高频计算时，有些方法可能会存在一些局限性。文中方法可作为水下结构声辐射性能研究有力的手段。
In order to study the vibration of thin plate in the water, various software, such as ABAQUS, ANSYS Workbench and Virtual lab, are adopted to carry out the numerical calculation. The operation procedures of the software are almost the same. The calculated results show that the several ex-frequencies agree well with the experiment result. When high frequency is calculated, some methods may exhibit some limit. The methods in the text can be used to study the noise radiation of underwater structure.
2017,39(5): 6-9 收稿日期：2016-11-29
DOI：10.3404/j.issn.1672-7619.2017.05.002
分类号：U661.14
作者简介：李亚(1979-),男,博士,高级工程师,主要从事推进器噪声研究
参考文献：
[1] 赵玫. 结构振动噪声源[D]. 上海:上海交通大学. 2002年.
[2] MIGUEL C, JUNGER, DAVID F. Sound, structures, and their interaction migual, second edition, 1976.
[3] 杜功焕, 朱哲民, 龚秀芬. 声学基础[M]. 南京:南京大学出版社. 2001.
[4] 何凌. 船舶螺旋桨涡发放噪声和唱音研究[D]. 无锡:中国船舶科学研究中心, 2001.
[5] 郑治国, 孙大成, 刘宪亮. 用湿模态法进行流固耦合分析时一个问题的探讨[J]. 华北水利水电学院学报, 1998. 19(2):22-25. ZHENG Zhi-guo, SUN Da-cheng, LIU Xian-liang. A Study on the fluid-structure interaction with wet model[J]. Journal of North China Institute of Water Conservancy and Hydroelectric Power, 1998. 19(2):22-25.
[6] 杨吉新, 张可, 党慧慧. 基于Ansys的流固耦合动力分析方法[J]. 船海工程, 2008, 37(6):86-89. YANG Ji-xin, ZHANG Ke, DANG Hui-hui. Dynamic analysis method for fluid-structure interaction based on Ansys[J]. Ship & Ocean En gineering, 2008, 37(6):86-89.
[7] 缪旭弘, 钱德进, 姚熊亮, 等. 基于ABAQUS声固耦合法的水下结构声辐射研究[J]. 船舶力学, 2009, 13(2):319-324. MIAO Xu-hong, QIAN De-jin, YAO Xiong-liang, et al. Sound radiation of underwater structure based on coupled acoustic-structural analysis with ABAQUS[J]. Journal of Ship Mechanics, 2009, 13(2):319-324.
[8] 詹福良, 徐俊伟. Virtual. Lab Acoustics声学仿真计算从入门到精通[M]. 西安:西北工业大学出版社, 2013.
