研究均匀外压下的多腐蚀球形耐压壳的屈曲。将局部腐蚀简化为球壳上的方形等深减薄，分别研究单腐蚀、双腐蚀并立和双腐蚀叠加3种情况下球壳的稳定性，并在此基础上分析双腐蚀叠加的腐蚀面积、深度和腐蚀位置对承载能力的影响规律。结果表明，双腐蚀叠加球壳的屈曲载荷下降了33.4%，且腐蚀面积和深度对承载能力的影响高于腐蚀位置对承载能力的影响。
The buckling of a multi - corroded spherical pressure shell was studied under uniform external pressure. The local corrosion was simplified to the square on the shell, and the stability of the shell was studied under the conditions of single corrosion, double corrosion, respectively. On this basis, the effects of corrosion area, depth and corrosion position on the load carrying capacity of spherical shell were analyzed in the double corrosion stack. The results show that the buckling load of the double corrosion stack spherical shell is decreased by 33.4%, and the effect of the corrosion area and depth on the bearing capacity is higher than that of the corrosion location.
2022,44(5): 7-10 收稿日期：2021-05-14
DOI：10.3404/j.issn.1672-7649.2022.05.002
分类号：U661.4
作者简介：朱永梅(1969-)，女，教授，研究方向为深海耐压装备现代设计理论及方法
参考文献：
[1] MA Q L, ZHU Y M, LIANG W, et al. Buckling and strength of an externally pressurized spherical shell with reinforced opening[J]. International Journal of Pressure Vessels and Piping, 2018, 165: 11-19
[2] CUI W C. Progress in human occupied vehicle research[J]. Science, 2017, 69(4): 4-8
[3] ZHANG J, ZHANG M, TANG W X. Buckling of spherical shells subjected to external pressure[J]. Thin-walled Structures, 2017(2): 58-64
[4] 王芳, 杨青松, 胡勇, 等. 全海深载人潜水器载人舱缩比结构模型试验研究[J]. 中国造船, 2018, 59(2): 62-71
[5] B?ACHUT J. Buckling of corroded torispherical shells under external pressure [C]// Proceedings of the ASME 2018 Pressure Vessel and Piping Conference, Czech Republic: Prague, 2018.
[6] B?ACHUT J. Load bearing of corroded shells under external/internal pressure[J]. Journal of Structural Integrity and Maintenance, 2018, 3(4): 217-226
[7] B?ACHUT J, D. Sala. Buckling of corroded metallic domes under external pressure [C]//Proceedings of the 29th International Ocean and Polar Engineering Conference, Hawaii: USA, 2019.
[8] ZHANG J, WANG Y, TANG W, et al. Buckling of externally pressurised spherical caps with wall-thickness reduction[J]. Thin-Walled Structures, 2019, 136: 129-137
[9] MACKAY JR, SMITH MJ, VAN KEULEN F, et al. Experimental investigation of the strength and stability of submarine pressure hulls with and without artificial corrosion damage[J]. Marine Structures, 2010, 23: 339-359
[10] INOUE K, TAKAHASHI K, ANDO K, et al. Finite element analysis on the failure behavior of straight pipe with wall thinning[J]. Pressure Vessel and Piping Codes and Standards, 2004, 480: 1-7
[11] MADEW C, WILKES M, CHARLES R, et al. First Estimate plastic collapse solutions for flat and torispherical ended pressure vessels subjected to extensive corrosion wall thinning [C]// Proceedings of the ASME 2012 Pressure Vessels & Piping Conference, Canada: Toronto, 2012.
[12] 邱昌贤, 万正权, 黄进浩. 考虑腐蚀减薄的球壳开孔结构随机有限元分析[J]. 船舶力学, 2013, 17(11): 1269-1277
[13] HAN C J, ZHANG H. Failure pressure analysis of the pipe with inner corrosion defects by FEM[J]. International journal of electrochemical science, 2016, 11(6): 5046-5062
[14] SUN J, CHENG Y F. Assessment by finite element modeling of the interaction of multiple corrosion defects and the effect on failure pressure of corroded pipelines[J]. Engineering Structures, 2018: 278-286
[15] 王战辉, 马向荣, 高勇, 等. 双点腐蚀缺陷油气管道剩余强度[J]. 化工科技, 2019, 27(1): 9-13
[16] 王战辉, 马向荣, 范晓勇, 等. 含局部减薄缺陷管道剩余强度和剩余寿命的分析预测[J]. 化工机械, 2019, 46(1): 89-93
[17] China Classification Society. Specification for the entry and construction of diving systems and submersible [S]. Beijing: People Traffic Press, 1996.
[18] ZHANG Xu-yun, HAN Jun, XU Zi-yi, et al. Study on residual strength and remaining life of externally-corroded pipelines based on finite element aanlysis [J]. Chemical Machinery, 2013, 40(5): 639-641.
[19] SULTANA S, WANG Y, SOBEY A J, et al. Influence of corrosion on the ultimate compressive strength of steel plates and stiffened panelsq[J]. Thin-Walled Structures, 2015, 96: 95-104
[20] HUANG Y, ZHANG Y, LIU G, et al. Ultimate strength assessment of hull structural plate with pitting corrosion damnification under biaxial compression[J]. Ocean Engineering, 2010, 37(17): 1503-1512
[21] 马青丽. 深海耐压球壳开孔加强设计及试验研究[D]. 镇江: 江苏科技大学, 2018.
[22] 张建, 高杰, 王纬波, 等. 深海球形耐压壳力学特性研究[J]. 中国造船, 2015(4): 129-140
[23] European Committee for Standardization. Strength and stability of shell structures: EN 1993-1-6 [S]. EN Special Publication, 2007.
